List Archives >  Mathcad List Archive >  Archive by date >  This Month By Date >  This Month By Topic

[mathcad] Mathcad 2000 crashes in windows XP

Search email archive for  

[mathcad] Mathcad 2000 crashes in windows XP
Author: Smith, Mark    Posted: Tue, 25 Nov 2008 15:05:00 +0100
Hi list I am experiencing major problems with mathcad 2000 under windows XP with it crashing when copy & pasting in graph regions, I am also getting the same occasionally when cutting & pasting files in windows explorer when a mathcad document is open but not being worked on? I didn't get this behaviour under windows 2000. Is this a known problem & is there a fix? Windows indicates there is a problem in ole32.dll ModVer 5.1.2600.5512 Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to />

RE: [mathcad] Mathcad 2000 crashes in windows XP
Author: Neil Harris    Posted: Tue, 25 Nov 2008 14:20:28 -0000
I had a similar problem. I was told Mathcad 14 is the only version supported on Vista, but that crashes from time to time too! Even when it doesn't crash, it leaves bits of itself in memory, just like v13. Neil -----Original Message----- From: Smith, Mark Sent: 25 November 2008 14:05 To: /> Subject: [mathcad] Mathcad 2000 crashes in windows XP Hi list I am experiencing major problems with mathcad 2000 under windows XP with it crashing when copy & pasting in graph regions, I am also getting the same occasionally when cutting & pasting files in windows explorer when a mathcad document is open but not being worked on? I didn't get this behaviour under windows 2000. Is this a known problem & is there a fix? Windows indicates there is a problem in ole32.dll ModVer 5.1.2600.5512 Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to /> --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to />

RE:[mathcad] Mathcad 2000 crashes in windows XP
Author: Smith, Mark    Posted: Thu, 27 Nov 2008 12:35:11 +0100
Hi List Having done some more digging I discovered I had not installed the latest service patch PROmc2k2.exe which I managed to find, this seems to have cured the problem. It is noteworthy to mention that all service patches for old versions of mathcad seem to have disappeared of the adeptscience website, my guess is that since PCT have taken over mathsoft older versions are no longer supported? If anyone needs this update it can be found at http://www.metaftp.com/ftpserver/9092114/401 or if this disappears give me a shout. Regards mark Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to />

Re: [mathcad] Mathcad 2000 crashes in windows XP
Author: Chris Whitford    Posted: Tue, 25 Nov 2008 17:07:47 +0000
I am using Mathcad 20001i with XP. I seem to remember that this version was brought out just after XP was released, as an XP compatible version. So it may be that 2000 is not compatible and you will need a newer version. Chris At 15:05 25/11/2008 +0100, you wrote: >Hi list >I am experiencing major problems with mathcad 2000 under windows XP with >it crashing when copy & pasting in graph regions, I am also getting the >same occasionally when cutting & pasting files in windows explorer when >a mathcad document is open but not being worked on? I didn't get this >behaviour under windows 2000. >Is this a known problem & is there a fix? > >Windows indicates there is a problem in ole32.dll ModVer 5.1.2600.5512 > >Regards >mark > >Please be advised that this email may contain confidential information. > If you are not the intended recipient, please do not read, copy or >re-transmit this email. If you have received this email in error, >please notify us by email by replying to the sender and by telephone >(call us collect at +1 202-828-0850) and delete this message and any >attachments. Thank you in advance for your cooperation and assistance. > >In addition, Danaher and its subsidiaries disclaim that the content of >this email constitutes an offer to enter into, or the acceptance of, >any >contract or agreement or any amendment thereto; provided that the >foregoing disclaimer does not invalidate the binding effect of any >digital or other electronic reproduction of a manual signature that is >included in any attachment to this email. > >--- >The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com > List Archive: http://lists.adeptscience.co.uk/ >--- >Would you like this to come to a different email address? >--- >Simply leave the mailing list (see below) and re-join by >sending a blank email from the new address to: or >--- >You are currently subscribed to mathcad as: /> >To unsubscribe send a blank email to /> +------------------+ + Chris Whitford + Research Fellow, University of Leicester, Space Research Centre, + Physics and Astronomy Department, University Road, LEICESTER LE1 7RH, UK + Tel: +44 116 252 3496, Fax: +44 116 252 2464 + email: http://www.star.le.ac.uk/ + ------------------+ --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to />

Re: [mathcad] Mathcad 2000 crashes in windows XP
Author: LOUIS REYNOLDS    Posted: Wed, 26 Nov 2008 08:21:34 -0800
Mark: I use Mathcad 2000 Pro and XP. This works for me: CTRL click on the figure, CTRL V to copy then paste into WORD. Louis Reynolds ----- Original Message ----- From: Chris To: Sent: Tuesday, November 25, 2008 9:07 AM Subject: Re: [mathcad] Mathcad 2000 crashes in windows XP I am using Mathcad 20001i with XP. I seem to remember that this version was brought out just after XP was released, as an XP compatible version. So it may be that 2000 is not compatible and you will need a newer version. Chris At 15:05 25/11/2008 +0100, you wrote: >Hi list >I am experiencing major problems with mathcad 2000 under windows XP with >it crashing when copy & pasting in graph regions, I am also getting the >same occasionally when cutting & pasting files in windows explorer when >a mathcad document is open but not being worked on? I didn't get this >behaviour under windows 2000. >Is this a known problem & is there a fix? > >Windows indicates there is a problem in ole32.dll ModVer 5.1.2600.5512 > >Regards >mark > >Please be advised that this email may contain confidential information. > If you are not the intended recipient, please do not read, copy or >re-transmit this email. If you have received this email in error, >please notify us by email by replying to the sender and by telephone >(call us collect at +1 202-828-0850) and delete this message and any >attachments. Thank you in advance for your cooperation and assistance. > >In addition, Danaher and its subsidiaries disclaim that the content of >this email constitutes an offer to enter into, or the acceptance of, >any >contract or agreement or any amendment thereto; provided that the >foregoing disclaimer does not invalidate the binding effect of any >digital or other electronic reproduction of a manual signature that is >included in any attachment to this email. > >--- >The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com<http://www.adeptscience.com/> > List Archive: http://lists.adeptscience.co.uk/<http://lists.adeptscience.co.uk/> >--- >Would you like this to come to a different email address? >--- >Simply leave the mailing list (see below) and re-join by >sending a blank email from the new address to: or >--- >You are currently subscribed to mathcad as: /> >To unsubscribe send a blank email to /> +------------------+ + Chris Whitford + Research Fellow, University of Leicester, Space Research Centre, + Physics and Astronomy Department, University Road, LEICESTER LE1 7RH, UK + Tel: +44 116 252 3496, Fax: +44 116 252 2464 + email: http://www.star.le.ac.uk/<http://www.star.le.ac.uk/> + ------------------+ --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com<http://www.adeptscience.com/> List Archive: http://lists.adeptscience.co.uk/<http://lists.adeptscience.co.uk/> --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to /> --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to

RE: [mathcad] Mathcad 2000 crashes in windows XP
Author: Smith, Mark    Posted: Wed, 26 Nov 2008 17:43:57 +0100
Hi Lewis not quite what I meant. say you have a graph and wish to plot multiple variables on axis, I make place markers on the axis then copy & paste the original axis variable into the other positions then edit them, copying on the x axis seems to be problem free but doing it on the y axis causes a crash see image. regards mark ________________________________ From: LOUIS REYNOLDS Sent: 26 November 2008 16:22 To: /> Subject: Re: [mathcad] Mathcad 2000 crashes in windows XP Mark: I use Mathcad 2000 Pro and XP. This works for me: CTRL click on the figure, CTRL V to copy then paste into WORD. Louis Reynolds ----- Original Message ----- From: Chris Whitford To: Sent: Tuesday, November 25, 2008 9:07 AM Subject: Re: [mathcad] Mathcad 2000 crashes in windows XP I am using Mathcad 20001i with XP. I seem to remember that this version was brought out just after XP was released, as an XP compatible version. So it may be that 2000 is not compatible and you will need a newer version. Chris At 15:05 25/11/2008 +0100, you wrote: >Hi list >I am experiencing major problems with mathcad 2000 under windows XP with >it crashing when copy & pasting in graph regions, I am also getting the >same occasionally when cutting & pasting files in windows explorer when >a mathcad document is open but not being worked on? I didn't get this >behaviour under windows 2000. >Is this a known problem & is there a fix? > >Windows indicates there is a problem in ole32.dll ModVer 5.1.2600.5512 > >Regards >mark > >Please be advised that this email may contain confidential information. > If you are not the intended recipient, please do not read, copy or >re-transmit this email. If you have received this email in error, >please notify us by email by replying to the sender and by telephone >(call us collect at +1 202-828-0850) and delete this message and any >attachments. Thank you in advance for your cooperation and assistance. > >In addition, Danaher and its subsidiaries disclaim that the content of >this email constitutes an offer to enter into, or the acceptance of, >any >contract or agreement or any amendment thereto; provided that the >foregoing disclaimer does not invalidate the binding effect of any >digital or other electronic reproduction of a manual signature that is >included in any attachment to this email. > >--- >The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com > List Archive: http://lists.adeptscience.co.uk/ >--- >Would you like this to come to a different email address? >--- >Simply leave the mailing list (see below) and re-join by >sending a blank email from the new address to: or >--- >You are currently subscribed to mathcad as: /> >To unsubscribe send a blank email to /> +------------------+ + Chris Whitford + Research Fellow, University of Leicester, Space Research Centre, + Physics and Astronomy Department, University Road, LEICESTER LE1 7RH, UK + Tel: +44 116 252 3496, Fax: +44 116 252 2464 + email: http://www.star.le.ac.uk/ + ------------------+ --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to /> --- The Mathcad List - Discussion, Support & News Contributions: Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: To unsubscribe send a blank email to Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance. In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email. --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to
Attachments:  MyPicture1.gif

Re: [mathcad] Mathcad 2000 crashes in windows XP
Author: Rahul Chaubey    Posted: Thu, 27 Nov 2008 08:40:15 +0530
Dear chris We are using XP Version only. Rahul On 11/25/08, Chris Whitford wrote: > > I am using Mathcad 20001i with XP. I seem to remember that this version was > brought out just after XP was released, as an XP compatible version. So it > may be that 2000 is not compatible and you will need a newer version. > > Chris > > At 15:05 25/11/2008 +0100, you wrote: > >> Hi list >> I am experiencing major problems with mathcad 2000 under windows XP with >> it crashing when copy & pasting in graph regions, I am also getting the >> same occasionally when cutting & pasting files in windows explorer when >> a mathcad document is open but not being worked on? I didn't get this >> behaviour under windows 2000. >> Is this a known problem & is there a fix? >> >> Windows indicates there is a problem in ole32.dll ModVer 5.1.2600.5512 >> >> Regards >> mark >> >> Please be advised that this email may contain confidential information. >> If you are not the intended recipient, please do not read, copy or >> re-transmit this email. If you have received this email in error, >> please notify us by email by replying to the sender and by telephone >> (call us collect at +1 202-828-0850) and delete this message and any >> attachments. Thank you in advance for your cooperation and assistance. >> >> In addition, Danaher and its subsidiaries disclaim that the content of >> this email constitutes an offer to enter into, or the acceptance of, >> any >> contract or agreement or any amendment thereto; provided that the >> foregoing disclaimer does not invalidate the binding effect of any >> digital or other electronic reproduction of a manual signature that is >> included in any attachment to this email. >> >> --- >> The Mathcad List - Discussion, Support & News >> Contributions: /> >> Hosted by: Adept Scientific http://www.adeptscience.com >> List Archive: http://lists.adeptscience.co.uk/ >> --- >> Would you like this to come to a different email address? >> --- >> Simply leave the mailing list (see below) and re-join by >> sending a blank email from the new address to: >> or >> --- >> You are currently subscribed to mathcad as: /> >> To unsubscribe send a blank email to >> /> >> > > > +------------------+ > + Chris Whitford > + Research Fellow, University of Leicester, Space Research Centre, > + Physics and Astronomy Department, University Road, LEICESTER LE1 7RH, UK > + Tel: +44 116 252 3496, Fax: +44 116 252 2464 > + email: http://www.star.le.ac.uk/ > + ------------------+ > > > --- > The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com > List Archive: http://lists.adeptscience.co.uk/ > --- > Would you like this to come to a different email address? > --- > Simply leave the mailing list (see below) and re-join by > sending a blank email from the new address to: > or > --- > You are currently subscribed to mathcad as: /> > To unsubscribe send a blank email to > /> > --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to

RE: [mathcad] Mathcad 2000 crashes in windows XP
Author: Zeftel, Mona    Posted: Mon, 1 Dec 2008 09:54:48 -0500
Service patches back to version 11 are available on the PTC website at http://www.ptc.com/support/mathcad_downloads.htm Regards,   Mona Zeftel -----Original Message----- From: Smith, Mark Sent: Thursday, November 27, 2008 6:35 AM To: /> Subject: RE:[mathcad] Mathcad 2000 crashes in windows XP Hi List Having done some more digging I discovered I had not installed the latest service patch PROmc2k2.exe which I managed to find, this seems to have cured the problem. It is noteworthy to mention that all service patches for old versions of mathcad seem to have disappeared of the adeptscience website, my guess is that since PCT have taken over mathsoft older versions are no longer supported? If anyone needs this update it can be found at http://www.metaftp.com/ftpserver/9092114/401 or if this disappears give me a shout. Regards mark --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to />

Re: [mathcad] Mathcad 2000 crashes in windows XP
Author: Rob Beale    Posted: Mon, 01 Dec 2008 15:38:37 +0000
Dear Mona Do you need to have a service contract to download patches as download requires password etc. I have a legal copy of 12. Robert Beale > Service patches back to version 11 are available on the PTC website at http://www.ptc.com/support/mathcad_downloads.htm > > Regards, > > Mona Zeftel > > > > -----Original Message----- > From: Smith, Mark > Sent: Thursday, November 27, 2008 6:35 AM > To: /> > Subject: RE:[mathcad] Mathcad 2000 crashes in windows XP > > Hi List > Having done some more digging I discovered I had not installed the > latest service patch PROmc2k2.exe which I managed to find, this seems to > have cured the problem. It is noteworthy to mention that all service > patches for old versions of mathcad seem to have disappeared of the > adeptscience website, my guess is that since PCT have taken over > mathsoft older versions are no longer supported? > > If anyone needs this update it can be found at > http://www.metaftp.com/ftpserver/9092114/401 or if this disappears give > me a shout. > Regards > mark > > > > --- > The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com > List Archive: http://lists.adeptscience.co.uk/ > --- > Would you like this to come to a different email address? > --- > Simply leave the mailing list (see below) and re-join by > sending a blank email from the new address to: > or > --- > You are currently subscribed to mathcad as: /> > To unsubscribe send a blank email to /> > > --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to />

RE: [mathcad] Mathcad 2000 crashes in windows XP
Author: Zeftel, Mona    Posted: Mon, 1 Dec 2008 11:46:07 -0500
Dear Rob, The service releases from that page do not require a service contract. You need a password for the PTC website in general, but anyone can get one. Regards,   Mona -----Original Message----- From: Rob Beale Sent: Monday, December 01, 2008 10:39 AM To: /> Subject: Re: [mathcad] Mathcad 2000 crashes in windows XP Dear Mona Do you need to have a service contract to download patches as download requires password etc. I have a legal copy of 12. Robert Beale > Service patches back to version 11 are available on the PTC website at http://www.ptc.com/support/mathcad_downloads.htm > > Regards, > > Mona Zeftel > > > > -----Original Message----- > From: Smith, Mark > Sent: Thursday, November 27, 2008 6:35 AM > To: /> > Subject: RE:[mathcad] Mathcad 2000 crashes in windows XP > > Hi List > Having done some more digging I discovered I had not installed the > latest service patch PROmc2k2.exe which I managed to find, this seems to > have cured the problem. It is noteworthy to mention that all service > patches for old versions of mathcad seem to have disappeared of the > adeptscience website, my guess is that since PCT have taken over > mathsoft older versions are no longer supported? > > If anyone needs this update it can be found at > http://www.metaftp.com/ftpserver/9092114/401 or if this disappears give > me a shout. > Regards > mark > > > > --- > The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com > List Archive: http://lists.adeptscience.co.uk/ > --- > Would you like this to come to a different email address? > --- > Simply leave the mailing list (see below) and re-join by > sending a blank email from the new address to: > or > --- > You are currently subscribed to mathcad as: /> > To unsubscribe send a blank email to /> > > --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to /> --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to />

Re: [mathcad] Mathcad 2000 crashes in windows XP
Author: Rob Beale    Posted: Tue, 02 Dec 2008 08:44:39 +0000
Dear Mona How do I get a password? Thanks Rob > Dear Rob, > > The service releases from that page do not require a service contract. You need a password for the PTC website in general, but anyone can get one. > > Regards, > > Mona > > > > -----Original Message----- > From: Rob Beale > Sent: Monday, December 01, 2008 10:39 AM > To: /> > Subject: Re: [mathcad] Mathcad 2000 crashes in windows XP > > Dear Mona > > Do you need to have a service contract to download patches as download > requires password etc. I have a legal copy of 12. > > Robert Beale > >> Service patches back to version 11 are available on the PTC website at http://www.ptc.com/support/mathcad_downloads.htm >> >> Regards, >> >> Mona Zeftel >> >> >> >> -----Original Message----- >> From: Smith, Mark >> Sent: Thursday, November 27, 2008 6:35 AM >> To: /> >> Subject: RE:[mathcad] Mathcad 2000 crashes in windows XP >> >> Hi List >> Having done some more digging I discovered I had not installed the >> latest service patch PROmc2k2.exe which I managed to find, this seems to >> have cured the problem. It is noteworthy to mention that all service >> patches for old versions of mathcad seem to have disappeared of the >> adeptscience website, my guess is that since PCT have taken over >> mathsoft older versions are no longer supported? >> >> If anyone needs this update it can be found at >> http://www.metaftp.com/ftpserver/9092114/401 or if this disappears give >> me a shout. >> Regards >> mark >> >> >> >> --- >> The Mathcad List - Discussion, Support & News >> Contributions: /> >> Hosted by: Adept Scientific http://www.adeptscience.com >> List Archive: http://lists.adeptscience.co.uk/ >> --- >> Would you like this to come to a different email address? >> --- >> Simply leave the mailing list (see below) and re-join by >> sending a blank email from the new address to: >> or >> --- >> You are currently subscribed to mathcad as: /> >> To unsubscribe send a blank email to /> >> >> >> > > > --- > The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com > List Archive: http://lists.adeptscience.co.uk/ > --- > Would you like this to come to a different email address? > --- > Simply leave the mailing list (see below) and re-join by > sending a blank email from the new address to: > or > --- > You are currently subscribed to mathcad as: /> > To unsubscribe send a blank email to /> > > --- > The Mathcad List - Discussion, Support & News > Contributions: /> > Hosted by: Adept Scientific http://www.adeptscience.com > List Archive: http://lists.adeptscience.co.uk/ > --- > Would you like this to come to a different email address? > --- > Simply leave the mailing list (see below) and re-join by > sending a blank email from the new address to: > or > --- > You are currently subscribed to mathcad as: /> > To unsubscribe send a blank email to /> > > --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to

RE: [mathcad] Mathcad 2000 crashes in windows XP
Author: Zeftel, Mona    Posted: Tue, 2 Dec 2008 11:03:25 -0500
Dear Rob and others, You just set one up when you land on the page. The ptc.com website and http://www.ptc.com/support/mathcad_downloads.htm is available to everyone. Regards, Mona From: Rob Beale Sent: Tuesday, December 02, 2008 3:45 AM To: /> Subject: Re: [mathcad] Mathcad 2000 crashes in windows XP Dear Mona How do I get a password? Thanks Rob Dear Rob, The service releases from that page do not require a service contract. You need a password for the PTC website in general, but anyone can get one. Regards, Mona -----Original Message----- From: Rob Beale Sent: Monday, December 01, 2008 10:39 AM To: /> Subject: Re: [mathcad] Mathcad 2000 crashes in windows XP Dear Mona Do you need to have a service contract to download patches as download requires password etc. I have a legal copy of 12. Robert Beale Service patches back to version 11 are available on the PTC website at http://www.ptc.com/support/mathcad_downloads.htm Regards, Mona Zeftel -----Original Message----- From: Smith, Mark Sent: Thursday, November 27, 2008 6:35 AM To: /> Subject: RE:[mathcad] Mathcad 2000 crashes in windows XP Hi List Having done some more digging I discovered I had not installed the latest service patch PROmc2k2.exe which I managed to find, this seems to have cured the problem. It is noteworthy to mention that all service patches for old versions of mathcad seem to have disappeared of the adeptscience website, my guess is that since PCT have taken over mathsoft older versions are no longer supported? If anyone needs this update it can be found at http://www.metaftp.com/ftpserver/9092114/401 or if this disappears give me a shout. Regards mark --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to /> --- The Mathcad List - Discussion, Support & News Contributions: /> Hosted by: Adept Scientific http://www.adeptscience.com List Archive: http://lists.adeptscience.co.uk/ --- Would you like this to come to a different email address? --- Simply leave the mailing list (see below) and re-join by sending a blank email from the new address to: or --- You are currently subscribed to mathcad as: /> To unsubscribe send a blank email to

Previous by date: Re: [mathcad] recent documents,  Eden Mei
Next by date: RE: [mathcad] Mathcad 2000 crashes in windows XP,  Neil Harris
Previous thread: [mathcad] new Design of Experiments functionality for Mathcad,  Zeftel, Mona
Next thread: [mathcad] Mathcad 2000 crashes in windows XP,  Smith, Mark