 |
|
List Archives >
Mathcad List Archive >
Archive by date >
This Month By Date >
This Month By Topic
[mathcad] RE: Mathcad 13 and C_Dilla
| [mathcad] RE: Mathcad 13 and C_Dilla |
|
Author: Oakley, Philip SELEX UK
Posted: Wed, 11 Jan 2006 16:51:56 +0000
|
Mathcad does use FlexLM for the enterprise edition.
It can also be used for node locked PCs as well [i.e. home usage from a corporate licence - the deal is 2 home licences for each corporate floating licence as long as you are in maintenance!!]
I suggest you call support and ask for a FlexLM version if needed.
Philip
From: Chris Whitford "mailto:chw"
Sent: 11 January 2006 14:48
To: Mathcad Discussion List
Subject: [mathcad] RE: Mathcad 13 and C_Dilla
*** WARNING ***
This mail has originated outside your organization,
either from an external partner or the Global Internet.
Keep this in mind if you answer this message.
It's a pity Mathsoft doesn't use flexlm. It still ties the software to the
machine, but it uses just one ID, usually the MAC address, which doesn't
change unless you scrap the computer. I have 5 or 6 flexlm licensed
products and it always works reliably. Perhaps all companies should
register their licensees with a third party to protect users should they
cease trading?
Chris
At 08:50 11/01/2006 -0500, you wrote:
>I think cdilla writes data to an otherwise inaccessible area on the hard
>drive, so an image of the disk may not be sufficient. Thus, other
>software with the cdilla system can interfere.
>
> I have had cdilla fail unexpectedly, one while in the math soft
>offices. They fixed it immediately, but it gives me the creeps.
+ Chris Whitford
+ Research Fellow, University of Leicester, Space Research Centre,
+ Physics and Astronomy Department, University Road, LEICESTER LE1 7RH, UK
+ Tel: +44 (0)116 252 3496, Fax: +44 (0)116 252 2464
+ email: "chw" http://www.star.le.ac.uk/
********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************
|
[View Complete Thread]
Previous by date: [mathcad] RE: rgeom mistake?, Oakley, Philip SELEX UK
Next by date: [mathcad] Re: Mathcad 13 and C_Dilla, Steve Bradbury
Previous thread: [mathcad] rgeom mistake?, Marc Artzrouni
Next thread: [mathcad] RE: Mathcad 13 and C_Dilla, Oakley, Philip SELEX UK
|
|
|
RSS Feeds
Packs
